Full Custom Glock From Stipple To RMR Cut

We started with a stock Glock and created this beautiful masterpiece.
We gave the slide some laser front cocking serrations and a full RMR cut on the back side. Then we took the frame and gave it trigger guard undercuts and laser stippled the sides
Once all that was completed we gave it a 2 tone coat of Cerakote to finish it all off.

Full Custom Glock Anarchy Pistol

 

This was one of the most fun projects to work on yet.
We were asked to make something special.. something we have never done before and this was what we came up with.
We did a full slide engraving cutting out all the honeycombs.. We then took out a few of the honeycomb centers to create small ports all the way thru the slide to the barrel.
And We added a laser cut RMR cut on the top of the slide.
We then added a few anarchy logos by request of the customer …
We did the laser cut honeycomb stipple and logo on the frame.
Then on to our cerakote shop for some fresh color.
Graphite Black and Smith and Wesson Red to top this whole build off.
What a masterpiece of beauty this plane normal GLOCK turned out to be.

Stirn Holsters Custom Glock Build

Enjoy this small video of some of the laser work being done.

The Custom Stirn Build was a while in the making.
We deliberated over this one for about a year until we finally were comfortable enough to begin making the first Laser cuts.
After the first cuts were made the rest just began to take shape until it turned out like this.
We are so proud of the design and layout of each and every Laser Engraving and Laser Cut.
Now lets see what type of Holster Eric at Stirn Holsters will make for this beauty.

 

The Oklahoma Sheriff Custom 23c Glock

 

We completely remade this beauty.
Starting out with a stock Glock 23c and then we began hacking up the slide with some front Laser Cut Serrations.
And then we cut the Chevron cuts from the back side to the front side on top of the Glock Slide.
Then we added the slide lighting on one side we did an american flag and the other just a cut around the ejection port.
These cuts along with the Burnt Bronze Distressed Cerakote coating turned out amazing.

This however wasnt enough,
We took and sanded the frame down to a smooth finish on each side.
And then let our laser cut a beautiful Chevron Stipple pattern into each side of the grip.
Inside of the Chevron Pattern we included this customers Sheriff’s badge. Which came out better than we thought it would.
Each and every detail is clearly visible and just looked amazing.
After all the frame work we blasted it taking off all the sharp edges of the polymer and then re-coating it with Graphite Black in order to bring the look full circle.

This Custom Sheriff themed Glock 23c just turned out awesome

Beautiful Laser Cut and Coated American Flag

We did our famous Laser Cut Chevrons and American Flag theme Laser work on this pistol.
Once we got all the laser work finished we turned to Our Cerakote flag design to finish it off.
I have to say this American Flag Theme Glock Pistol turned out just beautiful.

A Custom Laser Stipple And Multicam Slide

We did a custom Laser Stipple on this Glock Frame and Coated it a Cerakote Sable Brown .
Then we took the slide and did a super dark multicam with a small splash of brown to blend in with the custom Laser Engraved frame we did.
The combo turned out just completely amazing.

Glock19 Gen5 Full Laser Work Battleworn

We took a regular old Gen5 Glock 19 and completely transformed it.
Using our Fiber Laser engraver we deep laser engraved the slide from one end to the other adding Chevrons across the top
And then doing a slide lightening across the sides and adding front serration to the front section of the slide.
One of the sides we added an american flag.
But that wasn’t enough after that was done we did a full frame laser stipple job using the same Chevron symbols.
I do believe this Glock turned out amazing.

Enjoy the video of us doing the laser stipple job.