Stirn Holsters custom 1911

The Stirn Holsters custom 1911 started with a plain old Ruger 1911 and then we added our little touch of American love to it.
Incorporating the absolute best holster maker in the country Stirn Holsters Logo and information custom build for the Owner Eric Stirn.
Along with his attitude and his American pride, This 1911 custom American edition turned out just beautiful with a mix of Laser engraving , Cerakote, and a little touch of Hand Polishing the raised section.
If you have any ideas you would like to bounce off of us for your next custom project please let us know.

Our Steam Punk Ar9 Gear Gun

This is one of our most intense designs we have ever done.
It has taken a long time to build this AR9 Pistol but we are super proud of the steam punk design that we have laser engraved across ever face of the pistol. All the gears look as if they are actually able to move against each other and push the next gear.
A lot of time and thought went into this beautiful AR9 pistol.
If your looking for your next Laser designed firearm then contact us and see if we can make something that will turn every head at the gun range.

Beautiful Custom Laser And Cerakote 1911

After Laser Cutting some ports on this slide We covered this Taurus 45acp 1911 with Elite Blackout and Habanero Red Cerakote .
This thing is one beautiful weapon of choice..
Toms custom can take your dream to a reality with just about any Ideas you might have for your next cerakote or custom Laser gun designs so give us a shout next time you have an Idea for your next custom firearm.

Full Custom Glock From Stipple To RMR Cut

We started with a stock Glock and created this beautiful masterpiece.
We gave the slide some laser front cocking serrations and a full RMR cut on the back side. Then we took the frame and gave it trigger guard undercuts and laser stippled the sides
Once all that was completed we gave it a 2 tone coat of Cerakote to finish it all off.

Victor Martinez Full Custom 1911

We were commissioned to build this amazing 1911 from the ground up.
It is dedicated to the one and only Legendary Victor Martinez.
What a humble place to be in to create such a beautiful masterpiece..
We custom cut all the parts and then laser engraved the slide and grips.
Then gave this one of a kind 1911 a worn copper custom Cerakote job.
The Victor Martinez, and Victorias Ranch fully custom 1911 from Toms Custom is truly a work of art….

Sig MPX Flying Tigers Tribute Rifle

So with this beautiful work of art we started with a regular Sig MPX
We then began our laser engraving .. Adding rivets , Logos, and panal marks.
Then we covered the entire thing in Cerakote.
Creating a one of a kind masterpiece for its new owner.
A true Flying Tigers Tribute for a retired Air Force Officer.

Custom 1911 gets laser cut and Distressed

We took a stock normal ATI 1911 and remade it into a legend.
Complete with Laser cut slide, Ports, and opened up mag well.
Then we did a black and red distressed Cerakote coating. And laser engraved Barrel Housing.
Yes, we can take something bland and boring and turn it into something dreams are made of.

Awesome Pink Black Widow Gun

 

And just like that we have one of the coolest Ladies pistol we have ever done.
This thing is just totally awesome. We took a stock Sig p938 and totally tricked it out.
Stipped the boring Flat Dark Earth coating it had.. Gave it a killer laser engraved frame.
Complete with Black Widow Spiders crawling all over this thing.
Some engravings cutting all the way through to show off the internals.
Then we gave it a custom Cerakote Coating with our homemade color …
Dream Pink. Which has a Holographic appeal… It sparkles in the sun and hides this secret in the shade.
We then back filled the spiders again with Cerakote and then hit the whole thing with a nice coat of High Gloss Clear Cerakote. What an amazingly cool and classy piece of art…

Full Custom Glock Anarchy Pistol

 

This was one of the most fun projects to work on yet.
We were asked to make something special.. something we have never done before and this was what we came up with.
We did a full slide engraving cutting out all the honeycombs.. We then took out a few of the honeycomb centers to create small ports all the way thru the slide to the barrel.
And We added a laser cut RMR cut on the top of the slide.
We then added a few anarchy logos by request of the customer …
We did the laser cut honeycomb stipple and logo on the frame.
Then on to our cerakote shop for some fresh color.
Graphite Black and Smith and Wesson Red to top this whole build off.
What a masterpiece of beauty this plane normal GLOCK turned out to be.

Stirn Holsters Custom Glock Build

Enjoy this small video of some of the laser work being done.

The Custom Stirn Build was a while in the making.
We deliberated over this one for about a year until we finally were comfortable enough to begin making the first Laser cuts.
After the first cuts were made the rest just began to take shape until it turned out like this.
We are so proud of the design and layout of each and every Laser Engraving and Laser Cut.
Now lets see what type of Holster Eric at Stirn Holsters will make for this beauty.