These 2 Tac 14’s needed something to make them stand out from the crowd…
And the american flag across each one seemed to do the trick.
The Original Cincinnati / Dayton Ohio Certified Cerakote® Applicator And We Are The Premier Ohio Laser Engraver
We are located at:
107 Bourbon Street
Blanchester, Ohio 45107
Phone: 937-550-1119
Hours: Mon-Fri 10:30-5:30 – Other hours are available by Appointment Only
These 2 Tac 14’s needed something to make them stand out from the crowd…
And the american flag across each one seemed to do the trick.
The beautiful 1911 was hand cut here in our shop and then we pre fit each part.
Once everything fit perfectly we then decided on a theme which of course a hand made 1911 should always be patriotic in order to pull on our 2ed amendment rights and so we went patriotic on this one… We did all the deep laser engraving on the slide and then ran it through the worn copper custom cerakote coating. In order to add just a splash of color we went with our burnt crimson to trim everything out.
Not being fully satisfied just yet… We added a laser engraved 2 tone flag down the length of the grips on both sides.
This custom American themed 1911 turned out amazing.
This LifeCard Emergency Carry 22 pistol from Trailblazer Firearms was transformed into a custom AMX Clone for Tylers Army.
First we coated it with Graphite Black and Tungsten Cerakote and then we Laser Engraved it.
We completely remade this beauty.
Starting out with a stock Glock 23c and then we began hacking up the slide with some front Laser Cut Serrations.
And then we cut the Chevron cuts from the back side to the front side on top of the Glock Slide.
Then we added the slide lighting on one side we did an american flag and the other just a cut around the ejection port.
These cuts along with the Burnt Bronze Distressed Cerakote coating turned out amazing.
This however wasnt enough,
We took and sanded the frame down to a smooth finish on each side.
And then let our laser cut a beautiful Chevron Stipple pattern into each side of the grip.
Inside of the Chevron Pattern we included this customers Sheriff’s badge. Which came out better than we thought it would.
Each and every detail is clearly visible and just looked amazing.
After all the frame work we blasted it taking off all the sharp edges of the polymer and then re-coating it with Graphite Black in order to bring the look full circle.
This Custom Sheriff themed Glock 23c just turned out awesome
We love doing custom One offs for Ducks Unlimited And this one was a huge hit.
We first did a huge amount of Laser engraving and then gave it our brand new Hand Worn Bronze finish.
This is the beginning stages of the Spiderman Punisher Theme AR15 build.
We were commissioned to come up with a killer design that would build off of a Spiderman Punisher and this is it.
We took and did a full skeletonized Magwell design by laser cutting the design all the way through.
And then we took it to the booth and laid down our Cerakote
We started with a graphite black base And ended with the Smith and wesson Accents.
This beautiful AR 15 is layered in our fully custom Cerakote Dark Brown Multicam.
Our customer loved the Multicam Black but wanted to explore his options with colors.
Knowing that we could use any color he wanted… this is what we ended up with..
This Ar 15 turned out just beautiful.
We did our famous Laser Cut Chevrons and American Flag theme Laser work on this pistol.
Once we got all the laser work finished we turned to Our Cerakote flag design to finish it off.
I have to say this American Flag Theme Glock Pistol turned out just beautiful.
This pistol design just turned out amazing.
Our customer wanted something very specific and we were just a little worried about how we would get such a great idea onto such a small canvas…
But here is the final piece and it just turned out way better than we could have hoped for.
Done is Burnt Bronze, Graphite Black, and Smith and wesson Gray Cerakote the color combinations really worked well off of each other to create a masterpiece .
And the Joker now has a brand new Custom Glock.
We took this rather bland and boring Glock and turned it into a one of a kind Joker Themed Glock.
We custom Laser Stippled the grips
Custom Laser cut forward Serrations
Then we had to open up a couple windows , One on each side so the Joker could breath a little better.
Then we had to add a very colorful rip torn camo to the slide
And then we had to add a few Deep Engravings that only a True Joker at heart could approve.
Cerakote® is a ceramic based finish that can be applied to metals, plastics, polymers and wood. The unique formulation used for Cerakote ceramic coating enhances a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength, and hardness. Each of these properties is rigorously tested to guarantee that Cerakote products remain at the forefront of the ceramic coatings market. Cerakote ceramic coatings utilize state-of-the-art technology to out-perform any competitive coating in both laboratory settings and real world applications.
You can Visit Cerakotes Official Website for more information.
Copyright © 2025 ·Crystal Child Theme on Genesis Framework · WordPress · Log in