American Cerakote Turkey Shoot Special

 

This Turkey Shoot Special made its way to our shop for a full make over.
We went American Pride Crazy on it.
You have the pledge of Allegiance wrapped around the front bar.
The 2nd amendment wrapped around the rear stand.
I stand lightly etched into the main flag.
An eagle / flag flowing down each side.
And the statue of Liberty on the very front section.
Cant get no more American than that….

Awesome Pink Black Widow Gun

 

And just like that we have one of the coolest Ladies pistol we have ever done.
This thing is just totally awesome. We took a stock Sig p938 and totally tricked it out.
Stipped the boring Flat Dark Earth coating it had.. Gave it a killer laser engraved frame.
Complete with Black Widow Spiders crawling all over this thing.
Some engravings cutting all the way through to show off the internals.
Then we gave it a custom Cerakote Coating with our homemade color …
Dream Pink. Which has a Holographic appeal… It sparkles in the sun and hides this secret in the shade.
We then back filled the spiders again with Cerakote and then hit the whole thing with a nice coat of High Gloss Clear Cerakote. What an amazingly cool and classy piece of art…

Ohio State Theme Custom Made 1911

A Rock Island 1911 custom created with custom made jeweled grips.
This Ohio State Theme Pistol has been coated with a 3 color Cerakote Coating,
And then we custom made a set of grips for the beauty and inlaid a diamond medallion in the grips.
What an amazing beautiful Ohio State Theme Pistol.

Full Custom Glock Anarchy Pistol

 

This was one of the most fun projects to work on yet.
We were asked to make something special.. something we have never done before and this was what we came up with.
We did a full slide engraving cutting out all the honeycombs.. We then took out a few of the honeycomb centers to create small ports all the way thru the slide to the barrel.
And We added a laser cut RMR cut on the top of the slide.
We then added a few anarchy logos by request of the customer …
We did the laser cut honeycomb stipple and logo on the frame.
Then on to our cerakote shop for some fresh color.
Graphite Black and Smith and Wesson Red to top this whole build off.
What a masterpiece of beauty this plane normal GLOCK turned out to be.

Stirn Holsters Custom Glock Build

Enjoy this small video of some of the laser work being done.

The Custom Stirn Build was a while in the making.
We deliberated over this one for about a year until we finally were comfortable enough to begin making the first Laser cuts.
After the first cuts were made the rest just began to take shape until it turned out like this.
We are so proud of the design and layout of each and every Laser Engraving and Laser Cut.
Now lets see what type of Holster Eric at Stirn Holsters will make for this beauty.

 

Two tac-14’s look awesome as flags

 

These 2 Tac 14’s needed something to make them stand out from the crowd…
And the american flag across each one seemed to do the trick.

Laser Cut 1911 Patriot In Worn Copper

The beautiful 1911 was hand cut here in our shop and then we pre fit each part.
Once everything fit perfectly we then decided on a theme which of course a hand made 1911 should always be patriotic in order to pull on our 2ed amendment rights and so we went patriotic on this one… We did all the deep laser engraving on the slide and then ran it through the worn copper custom cerakote coating. In order to add just a splash of color we went with our burnt crimson to trim everything out.
Not being fully satisfied  just yet… We added a laser engraved 2 tone flag down the length of the grips on both sides.
This custom American themed 1911 turned out amazing.

Tylers Army LifeCard AMX Clone

This LifeCard Emergency Carry 22 pistol from Trailblazer Firearms was transformed into a custom AMX Clone for Tylers Army.
First we coated it with Graphite Black and Tungsten Cerakote and then we Laser Engraved it.

The Oklahoma Sheriff Custom 23c Glock

 

We completely remade this beauty.
Starting out with a stock Glock 23c and then we began hacking up the slide with some front Laser Cut Serrations.
And then we cut the Chevron cuts from the back side to the front side on top of the Glock Slide.
Then we added the slide lighting on one side we did an american flag and the other just a cut around the ejection port.
These cuts along with the Burnt Bronze Distressed Cerakote coating turned out amazing.

This however wasnt enough,
We took and sanded the frame down to a smooth finish on each side.
And then let our laser cut a beautiful Chevron Stipple pattern into each side of the grip.
Inside of the Chevron Pattern we included this customers Sheriff’s badge. Which came out better than we thought it would.
Each and every detail is clearly visible and just looked amazing.
After all the frame work we blasted it taking off all the sharp edges of the polymer and then re-coating it with Graphite Black in order to bring the look full circle.

This Custom Sheriff themed Glock 23c just turned out awesome

The Ducks Unlimited AR15 Limited Edition

We love doing custom One offs for Ducks Unlimited And this one was a huge hit.
We first did a huge amount of Laser engraving and then gave it our brand new Hand Worn Bronze finish.